The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares G5 Convert T3 T4 1000 SP Cali 2 Stainless Steel and Titanium Items

Sort by Title

Sort by Price

Page 9 of 10

1 2 3 4 5 6 7 8 9 10

Exhaust Stud Kit Stainless Steel

SSA96040 Fits S3, 850/1000 ALL Models, 1100 Sport, V11 Sport, V7 Sport, S3, Cali 1100 (1994-1997), Cali EV ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport (2v/cyl), Griso 850, Griso 1100, Norge 850, Norge 1200 (2v/cyl)

Dimensions:
M8 x 40mm studs

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

part in stock More than 5 in stock

96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Clamp Silencer Stainless Steel

EXA14400 Fits 850T, G5, Cali 2, Cali 3, Cali 1100 (1994-1997), Cali EV (1997-2007), Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, Spada ALL, T3, T4, T5, V65 Florida, Le Mans 1000, V7 II ALL

Dimensions:
46mm internal diameter when slack

Heavy duty stainless steel exhaust silencer clamp replaces Guzzi ref. 29123450, 03123400

part in stock More than 5 in stock

14123400 GU14123400 14 12 34 00
1412 3400 1412.3400 14.12.34.00

£9.10

INC VAT

£7.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Engine, Gearbox and Bevel Box Level or Drain Plug Stainless Steel

SSA95214 Fits V35 ALL, V50 ALL, V65 ALL, 750T, Targa 750, Strada 750, Nevada 750 ALL, V7 ALL, V7 700, V7 Special, 750 S3, V7 Sport, 750S, 850/1000 ALL Models, 850 GT, Cali 1100 (1994-1997), Cali EV, V11 Sport, Quota 1100, 1100 Sport ALL

Dimensions:
M10

Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.

Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt

part in stock More than 5 in stock

95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14

£9.90

INC VAT

£8.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Engine Gearbox and Bevel Box Stainless Bolt Kit Without Sump Extension

SSA80003 Fits 1000 SP, G5, S3, T3, T4, ,Cali 2 (VHB carbs), T5

Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

part in stock 3 in stock

£85.00

INC VAT

£70.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Engine Gearbox and Bevel Box Stainless Bolt Kit With Sump Extension

SSA80004 Fits 1000 SP, G5, T3, T4, T5

Stainless steel fasteners kit for VHB carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

part in stock 3 in stock

£85.00

INC VAT

£70.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Distributor Cap Screw M5

SSA05025 Fits 850/1000 ALL Models, V7 Sport, S3, 750S

Dimensions:
M5 x 25mm

M5 screw for attaching points cover

2 required per distributor. Can be used in place of hex bolt Guzzi ref. 98082225

part in stock More than 5 in stock

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Copper Grease 70g Tube

SIA11070 Universal Part

Handy 70g tube of copper grease anti-seize paste

Use to prevent threaded studs, nuts and bolts form seizing

Please note this part CANNOT be posted outside of the UK mainland area

part in stock 1 in stock

£6.00

INC VAT

£5.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Button Head Screw M6 x 16mm Stainless Steel

SSA06216 Universal Part

Dimensions:
M6 x 16mm

A2 stainless socket cap button head screw M6 x 16mm

part in stock More than 5 in stock

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake or Gear Pivot Bolt, Nut and Washer Kit Stainless Steel

SSA98660 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV

Dimensions:
M12

M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut

Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5

part in stock More than 5 in stock

98053660-z 98053660 GU98053660 98 05 36 60
9805 3660 9805.3660 98.05.36.60

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Disc Bolt Stainless Steel Front

BRA99499 Fits T3, T4, G5, Convert, Cali 2, Mille GT (spoked wheel)

Dimensions:
M8 x 110mm

Stainless steel front brake disc bolt

part in stock More than 5 in stock

98052499 GU98052499 98 05 24 99
9805 2499 9805.2499 98.05.24.99

£1.80

INC VAT

£1.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 9 of 10

1 2 3 4 5 6 7 8 9 10